Repair

Repair

Have your doors, windows, and locks repaired or replaced by a professional locksmith

Are you starting to notice signs of weakness on your door, windows or locks in Brussels or more precisely in Uccle ? The security of access points to your home is not a mere detail in municipalities such as Berchem-Sainte-Agathe , Waterloo , Ixelles , Woluwe-Saint-Lambert , etc. You have to act fast because the situation can get worse and make you spend more than you should have spent. In addition, you are at risk of being the victim of a burglary. Therefore, for all your door, window and lock repair or replacement needs, react quickly.

When should you repair or replace a front door and an interior door?

Made of metal, wood, PVC, plywood or composite material, interior doors sometimes need a complete renovation or replacement and not a simple locksmith repair. The cost of the repair depends on the material, the type of opening, the difficulty of accessing the site, etc.

Plywood doors are usually easy to recognize since they are hollow and therefore more vulnerable to damage. For wooden front doors, replacement becomes necessary as soon as you notice that the wood is gnawing, starting to mold or cracking.

Imagine, for example, holes or cracks in your door, with the air seeping in and the feeling of insecurity that goes with it. In fact, a door that is broken or does not close properly due to a mismatch for example, will let both heat and humidity through.

The consequences are multiple and can range from insecurity to an excessive increase in your energy consumption due to greater energy losses.

In these types of situations, it is important to call on a professional who will help you assess the condition of the door and determine the optimal solution to apply. If the door needs to be replaced, then he will guide you in choosing a model adapted to your tastes and your budget.

In some cases, your door may swell. Its base then begins to rub against the floor or the frame, making it less easy to close and somewhat noisy. This problem usually affects wooden doors that are exposed to moisture over a long period of time.

Some types of wood have this weakness. However, there are treatments that can be applied to the wood to prevent it from expanding. A hole in plywood can happen quickly at the slightest impact.

In general, as a good handyman, you can fill the holes in plywood doors. However, letting a professional take care of it is always more beneficial.

Especially if the door is made of PVC or aluminum, it is not obvious that you will find the right material or technology for the repair. Trust our experience and professionalism. The method of intervention will depend on the extent of the problem and the condition of the door. If the door is too old, it may be ideal to replace it.

Adopt the right gestures to preserve the life of your front door and to avoid risky situations. Remember, as we said above, don’t slam your doors too hard when you close them. This habit acts on the plugs and can even create a mismatch with the door frame.

Maintain the security mechanisms on your doors. The slightest failure must be dealt with as quickly as possible and with the utmost efficiency. And don’t forget: your front door plays a crucial role in keeping your home safe and private.

When should a window be repaired?

Basically, to ensure the longevity of your windows, you should maintain them regularly, especially if they are made of wood. Regular maintenance also helps to increase the security of your home while optimising the thermal insulation of the home.

But in the absence of proper maintenance, signs of weakness are not always long in coming. Failure of windows, doors and locks are very serious vulnerabilities for your home. It is important to be attentive to detect the first signs of weakness early before the situation escalates.

There are many signs of failure. For example, the frame or sash of your windows may start to show signs of weakness. And while a replacement may sometimes be necessary, a simple repair can also be made when the damage is only partial.

Windows can need several types of repairs. Like what:

  • When the closing and opening mechanism fails, you should call a professional to grease the hinges, plane the frame or replace the hinges or gaskets.
  • When your window handle is broken, you will need to disassemble the entire handle and replace worn parts.
  • In the event of slight leaks, the repair will consist of either caulking or filling, in order to protect the performance of the window insulation.
  • If the glazing of your window is cracked or broken after an attempted break-in, for example, the professional will have to remove the sashes and install new glazing to protect the insulating and safety function of your glazing.
  • If the glazing is scratched, you can think about reducing the depth of the scratches by using ash or glass wool.

When should you replace a window?

In cases of serious failure, especially if the windows are outdated, it is ideal to think about a complete replacement. Otherwise, repairs could start to happen too often, which will cause you to spend more money than necessary while reducing the level of security of your home and its thermal insulation.

In fact, you have to keep in mind that windows have a certain lifespan. Wooden models, for example, have an average lifespan of 15 years, while aluminum models have a lifespan of 25 to 35 years. PVC models, on the other hand, can last up to 30 years if the installation has been done well at the beginning.

When your window has exceeded its lifespan or is already close to its end of life, it is advisable to proceed with a replacement. This is the case, for example, when the window starts to mold. Replacement is the best solution.

How much does it cost to repair a window?

To hire a professional to repair your windows, the budget depends on the level of wear and tear or degradation as well as the quality of the materials to be used for the repair.

That being said, for a repair of the hardware, you should expect to plan between 3 and 100 euros including VAT. Caulking will cost between €4 and €8 while repairing a blocked window can cost you between €100 and €250.

Glazing replacement work costs between €60 and €200 depending on whether it is single-glazed, double-glazed or triple-glazed, a conventional window or a roof window. To this must be added the cost of the professional’s service, which can range from 35 to 80 euros per hour.

It should be noted that you will only have to pay for repairing defective window mechanisms if you are a tenant. As a tenant, you are responsible for maintaining the carpentry of your windows to prevent them from deteriorating.

On the other hand, when the repair or replacement of windows is due to dilapidation or an error made during the installation of the joinery, the expenses are entirely borne by the owner of the dwelling.

Whatever the nature of the intervention, it is advisable to always call on an RGE-certified craftsman. This will ensure that you comply with the standards in carrying out your repair work. But to choose a professional, don’t forget to ask for quotes and get in touch with your insurer. They can offer you valuable advice on how to make a wiser choice.

When should a lock be repaired?

Need a locksmith in Brussels ? Lock problems can be very stressful. While they can come in different forms, they are usually likely to cause you to panic or lose your temper. To help you, we offer our lock repair and replacement services.

Whether it’s emergency repair or maintenance, we can help. Here are some of the most common situations that may require you to repair your lock.

An attempted break-in? Call us to change your keys

Do you notice scratches on your door frame? Are there any signs of impact on the lock? Does the cylinder of the lock look like it’s sticking out of the door? These are signs that should not be ignored. As soon as you notice these signs around the mechanism of your lock, know that you have just been the victim of an attempted break-in.

Usually, after an attempted break-in, insurance will require you to replace your lock. There is, in fact, a good chance that the lock’s security mechanism will be damaged or that the thief will come back to the charge. Contact us for an accurate diagnosis and for the replacement of the lock.

A key that spins in a vacuum? We are at your service

Is your key spinning in a vacuum? Usually, this is usually due to the breakage of the barrel. When this happens, you could no longer open the door if it was already closed or close it if it was open. This kind of situation can get you stuck and waste your time. Call us to solve the problem as soon as possible.

A door that no longer opens? Call us for a quick response

Sometimes the key turns very well in the lock without opening the mechanism. Whether you’re inside or outside the apartment, keep your cool. Do not try to fix the situation yourself or you will completely damage your lock. Contact us and we will help you get out of this situation.

A slammed door with the keys inside?

This is a situation that happens very often. You walk out and close the door, forgetting that you left the keys on the other side of the lock. How do you get into your home? There are many tricks to handle these kinds of situations. But their effectiveness is never guaranteed.

To save time and not delay the resolution of the problem, it is best to call a locksmith as soon as possible. The latter will help you open the door in a few minutes without damaging the lock or the door shield.

A lock broken by wear and tear?

Even in the absence of a break-in attempt, your lock can break due to natural wear and tear. Indeed, by opening and closing your doors suddenly, the cylinder can be affected.

At some point, it may show signs of resistance. That’s why you sometimes have to force yourself a little to open or close your door. However, by doing so, the mechanism eventually locks and the lock can break. Lack of maintenance is the common cause of this kind of problem.

As soon as you notice that your lock is no longer responding easily, call a professional for a quick and efficient service.

A broken key in the cylinder?

A key that breaks in a lock, we encounter these kinds of problems too often in our business. Generally, the most frequent occurrences are observed in winter. In fact, when temperatures drop to a certain level, metals become brittle and can give way under pressure when a door is closed or opened.

Again, we advise you not to do anything in a hurry. Grab your smartphone and contact us. Hiring a professional will save you money and prevent you from damaging the rest of the installation. We will remove the part of the key stuck in your lock or open the door as is. We will make you a duplicate of the key so that you don’t have to change the lock.

Stories

Discover our articles

Despite all the precautions taken by manufacturers, it is clear...

How to find and choose a locksmith in Uccle? We...

The safety of a home remains one of the most...